4.3 ton AlphaG winch with gear brake

Name: 4.3 ton AlphaG winch with gear brake
Brand: horntools
SKU: HSW95G-24VDY
Price: 1149.0 EUR
Availability: OutOfStock

1.149,00€

Tax included. Shipping calculated at checkout

SKU: HSW95G-24VDY

GTIN: 9010354003504

Tension:

24V

12V 24V

Rope type:

Synthetic rope

Variant

Quantity:

Developed in Austria
5 year guarantee
Free advice

Description

The horntools Alpha 9.5 series is one of the most popular winches among our customers. They are versatile, have a low weight and a compact design. The Alpha G 9.5 is the strongest with a pulling force of up to 4.3 tons and, with a maximum pulling speed of 17 m/min, also the fastest winch in the series. The Alpha G 9.5 also scores points with a geared brake instead of a drum brake. The transmission brake does not wear out compared to the conventional drum brake and does not lose its braking effect over long periods of use. The horntools winch can be used in a variety of ways on your vehicle. It can be installed as a front winch or mounted directly on the bumper.

Characteristics:

Relay box is installed above the drum
Motor IP67 sealed by groove with sealing ring
Freewheel lever
Stainless steel crossbars
Reinforced rope drum
Powder-coated aluminum die-cast housing motor/gearbox
Transmission brake
Removable control unit (so that the control can be installed anywhere)
Reinforced, powder-coated contractor housing made of deep-drawn sheet metal

Scope of delivery:

Winch
Aluminum cable window
Fastening screws
Synthetic rope with soft end
Cable remote control
Operation manual

Danger:

Please note that our winches may only be used for ground traction and are not suitable for lifting!

The operating instructions for the winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!

A notice:

You can get all the important information about handling your new winch in the operating instructions and from your specialist dealer.
This winch can produce a higher level of noise.

FAQ & Download

Downloads

Operation manual
Drawing

Technical data

12 volts:

Gearbox: 3-stage planetary gearbox
Max. pulling force: 4300 kg
Max. pulling speed: 17 m/min*
Weight: 29.5kg
Engine type: Series Wound**
Gear ratio: 108:1
Max. power consumption: 500 amps
Voltage: 12V
Rope (∅ x length): 10 mm x 30 m
Drum (∅ x length): 63 x 216 mm
Overall size (LxWxH): 612 x 160 x 270 mm
Cable cross section: 50 mm²
Cable length: 180 cm

24 volts:

Gearbox: 3-stage planetary gearbox
Max. pulling force: 4300 kg
Max. pulling speed: 19 m/min*
Engine type: Series Wound**
Gear ratio: 108:1
Max. power consumption: 320 amps
Voltage: 24V
Rope (∅ x length): 10 mm x 30 m
Drum (∅ x length): 63 x 216 mm
Overall size (LxWxH): 612 x 160 x 270 mm
Weight: 29.5kg
Cable cross section: 50 mm²
Cable length: 180 cm

*measured without load

**Magnetic field is generated electrically

4.3 ton AlphaG winch with gear brake

1.149,00€

Why horntools?

Off-road quality

All of our products were developed for extreme off-road use and therefore meet the highest quality requirements.

Spare parts available

When things get tough, something can always be lost or broken. We are in favor of repairing instead of throwing away and therefore always have spare parts in stock.