Toyota Hilux Fender Flares Bolt 2016+ fender flares 40 mm set

Fender flare set for Toyota Hilux year 2016+
4 pieces - 40 mm wide

The ideal widening with a subtle look for your Ford Ranger. Not only is it elegant and complements the vehicle perfectly, but it is also flexible and almost indestructible. A parts certificate is included in the scope of delivery and there are 4 pieces in the set.

Facts:

• Elegant widening with a subtle look
• Flexible and almost indestructible
• Ideal for widening tracks using spacers, wider tires, rims with a smaller offset, etc.
• The width of the cover through the fender flares from the mounting surface is 40 mm.
• The installation is carried out using a 3M adhesive strip, which is already attached to the extension; all you have to do is remove the protective film for installation
• 4 extensions are supplied
• With parts certificate

ATTENTION - important assembly instructions:

1. The mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease.
   
   
2. The outside temperature and the temperature of the components or mounting surface at the assembly and the period of 24 hours thereafter must be at least 20° Celsius.
   
   
3. After removing the 3M tape carrier film, the widening must be pressed evenly onto the mounting surface for approx. 1 minute at high pressure, evenly to the mounting surface.
   
   
4. Please leave the vehicle standing for at least 4 hours after assembly, preferably 48 hours.
   
   
5. The final strength of the bond is only reached after 48 hours.
   
   
6. Please do not wash the vehicle for at least 48 hours!
   
   
7. In some mounting situations, especially if the mounting instructions cannot be followed,
   is an additional fastening by e.g. sheet metal driving screws, body adhesive, primer are recommended.