Rear winch carrier for pickups

Rear carrier suitable for all pickups
The rear carrier developed by horntools can be adjusted 9 times in width thanks to its special design. This means that the rear carrier can be perfectly adjusted on all common loading areas. It can also be used in conjunction with a truck bed mounted drawer, hardtop or cargo area cover. Thanks to the quick-release plate, the winch can be attached to the carrier either on the left, in the middle or on the right.

The rear carrier fits the following pickups:
• Volkswagen Amarok
• Toyota Hilux
• Mitsubishi L200
• Nissan Navara
• Dodge Ram
• Other American vehicles

The weight of the carrier, without winch, is 39 kg and has a depth of 50 cm, a width of 135 cm and a height of 38 cm.
________________________________________

Scope of delivery:
• Rear winch carrier
• Trailer hitch ball

________________________________________
Danger:
The carrier was designed for a load of up to two tons. Our team has successfully tested this durability.
However, we have set the load on the cross member at 300 kg, as there is a risk of damage to your vehicle with a higher load.
Please note that our winches may only be used for ground traction and are not suitable for lifting!
The operating instructions for the winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!

Guarantee:
The guarantee only applies to private users, not to commercial use and only if the operating instructions are followed.

A notice:
You can get all the important information about handling your new winch in the operating instructions and from your specialist dealer.
This winch can produce a higher level of noise.